Parts

The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install

The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams

absoluteBLACK Oval 110 BCD 1x Chainrings for Cyclocross greatly improve traction for CX or gravel riding. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring bolts are included

absoluteBLACK Oval 110 BCD 1x Chainrings for cyclocross greatly improve traction for CX or gravel riding. They are designed specifically for SRAM Apex 1 cranks that feature an asymmetric 110 BCD, 4-bolt pattern. The specially designed narrow-wide tooth profile keeps the chain snug. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with SRAM Apex 1 cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks

absoluteBLACK 1x Oval Direct Mount Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, and 7100 chains due to the different thickness of the teeth - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset converts any SRAM crank into Boost setup needed on Boost-spaced bikes - Designed for GXP, DUB, and long-spindle BB30 cranks - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/long-spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks

Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm

Zipp’s Service Course 70 Ergo bars ensure comfort and control for every hand position, thanks to their ergonomic flat tops and easy-to-reach drops. A short reach and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff for uncompromising strength, these aluminum bars are ready for anything.

Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.

Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty

Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.

Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.

Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)

The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life

The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD Cranks or Campagnolo CX10/11 cranks - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

Direct mount rings designed for SRAM cranks with removable spiders. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

Fat Paw Grips - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames. - Bronze bushing for smooth lever action - Low-profile ergonomic lever - Stainless steel bolt with spherical washer - CNC machined 6061-T6 aluminum

The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames. - Bronze bushing for smooth lever action - Low-profile ergonomic lever - Stainless steel bolt with spherical washer - CNC machined 6061-T6 aluminum

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.